Wanted: Clutch plates I'm after a set of clutch plates for a 620 or a good place to get them from please. |
barnett performance jobbies about 150 per set ... well worth the money |
Are they worn out Taken from the workshop manual Normal Clutch _______________ thickness of the drive plates (friction plates) should not be less than 3.5 mm. Overall thickness of the set of clutch plates should not be less than 41.3 mm APTC Clutch ______________ thickness of the drive plates (friction plates) should not be less than 3.2 mm. Overall thickness of the set of clutch plates should not be less than 50,2 mm. |
All times are GMT +1. The time now is 23:50. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK