Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   Hypermotard: 950 / 939 / 1100 / 796 (/forumdisplay.php?f=178)
-   -   Termignoni fitting instructions (/showthread.php?t=85624)

turbonium 17-Feb-2012 21:40

Termignoni fitting instructions
 
Hi all, has anyone got, or know where I can get fitting instructions for a full Termi system (Hypermotard)?

I believe there is a pdf that dealers have, but I've searched unsuccessfully online.

Info would be much appreciated.

Thanks.

antonye 18-Feb-2012 00:39

Yes indeed, ask and you shall receive... :D

http://www.sendspace.com/file/zm1lvw

turbonium 18-Feb-2012 01:11

Perfect. Many thanks.

I've got it stripped down and half reassembled, but my lambda sensor wire is too short? Further investigations tomorrow...

Thanks, JB

antonye 18-Feb-2012 01:31

You don't use the lambda sensor with the full kit - there should be a small cap to go over the plug #16 on page 2.

turbonium 18-Feb-2012 19:08

I have an Evo SP and it uses the sensors - apparently.

Just got figure out what to do with the bag of nuts and bolts left over :-)

turbonium 18-Feb-2012 21:16

Why don't they supply instructions?

Cant for the life of me work out how the exhaust hanger works. Different to the one in the instructions you sent me.

This job is taking a little longer than I expected.

evohypmatt 14-Apr-2012 22:22

its gonna sound awesome!! i dont have the dough for a new set of slip ons anyone got a used one??

Shazaam! 14-Apr-2012 22:42

Often a newly-installed exhaust pipe or slip-on doesn't fit-up properly. Aftermarket pipes are not a precision fit and often they let in combustion air that, when mixed with unburned fuel, results in the fuel being burned in the muffler. This will result in backfiring. I suggest using high temperature silicon sealant at the joints to keep the air out.

I recommend Permatex Ultra-Copper high temp RTV silicone gasket maker #101BR for the aftermarket slip-on system joints. Good to 700˚F intermittent. Available in auto parts stores.

antonye 24-Apr-2018 12:20

1 Attachment(s)
For anyone that needs the fitting instructions, I've attached them here.

You need to be registered on the site to download, but it's free and takes 5 minutes max :)

aasand 24-Apr-2018 16:16

Thanks for this. Helps out a bunch.


All times are GMT +1. The time now is 13:45.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK