1098 bip
 

Is there one? All pics have seen so far are mono (or at least with seat cowl and no rear pegs...)

Rear pegs, brackets and seat pad come with each bike :)

ah right, ta. does the S or can they bolt onto the S subframe?

The one I saw was an S and that had bracket mounts in the subframe :)

it dont show the pegs as they were not fitted but it does show the pillion seat

http://forum.alcohol-soft.com/paul/012.JPG

Foot peg mounting points are here circuled

http://forum.alcohol-soft.com/paul/footpegs.jpg

thanks :)

Yes, the S comes with all of the bits to make it a Biposto. Ordered my 1098s today and checked out the size of the 'bird table' which will only take the smallest of birds....

I reckon the addition of the pegs will take about 5 minutes and the swap between cover and seat pad, about 10 seconds. Really seems to be the best of both worlds at last....

They're all bips,@ the mo,steel subframe the lot !,just remove them straight into the bin,as wifes/girlfriends arn't allowed on,or near them,if only to assist applying zymol,its the law !!!

They are delivered as single seaters with a cowl fitted but with the seat pad and pegs seperately.

My seat pad and pegs will be going on eBay ;)

Steel subframe? That's gay. I'm deffo not buying one then - I wanna proper monoposto! :(