Termignoni on a 916 beffel removal. Dare i ask ...... :confused: I have a set of Termignoni cans on my 916 and the question is. As the baffels are easy to remove with just a small Philips screw to undo at the tip of each, i wish to remove them to free up some sound from within . However will i have to get a remap done if i do this ? As far as i know the bike was remapped for the Pipes anyway with a cvc chip ? ( not to sure ) so any friendly advice is welcome . Thanks. |
The Termis weren't supplied with baffles so the ones you have are aftermarket anyhow. Looking at the colour of them, you won't a remap, it appears to be running a little rich anyhow. |
Yup, as Nelly has just said. None of the Termi options were offered with a removable baffle, so they're going to be a modification to the supplied kit. Yup, they're looking very dark... They're probably only been fitted for MOTs (with any luck) Have you checked to see what chip/ECU setup you're running? G |
All times are GMT +1. The time now is 01:42. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK