termi gaskets ?? 2 Attachment(s) termi is blowing at the first joint from the rear cylinder. popped over to jhp and got this http://www.ducatisportingclub.com/at...d=12467989 41 the one jhp have supplied is way to big anyway took the exhaust off this morning and none of the joints have a gasket of any sort. http://www.ducatisportingclub.com/at...d=12467991 11 should they have a gasket ?? |
Yes all the joints should have a gasket, they are around £5 each, one large diameter and three the same smaller diameter. |
thanks ghost just to clarify this is the full 2 into 1 into2 54 mm system |
My system is the asym one but a slip joint requires a seal regardless, or it will suck in air giving popping on the overrun and blow also. :eek: |
Did you get it sorted mate? |
yep all back together and no gaskets. just a bit of exhaust sealant. |
my full system has no gaskets and no back firing??? |
All times are GMT +1. The time now is 23:40. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK