WANTED 996 long swingarm ,16.5 rear wheel & full race exhaust please pm me with details and prices Thanks |
There is a 16.5 Marvic on ebay at the mo for £250. :) |
wheel Quote:
I think the corse wheels take a bigger axle as well Thanks tho |
Quote:
Are you after a small or large hub 16.5 wheel? I have a marvic large hub 16.5 which you can have for £200 posted if you are not concerned about the hub size Nellie |
Wheel Quote:
Thanks for the reply Nellie I have a road hub,so Im going to have to look into the larger hub thing Cheers Chris |
You won't find 16.5 small hub. The only ones like that were made were specials. Very few kicking about. For the big hub, I bought once from a guy in Austria a conversion spacer allowing to run big hub on road hub. Short of this, you are looking at big numbers. You need to find a mag arm / Ducati Corse. The excentric size is different inner size (for big hub) as well as outter size. The big hub excentric won't work on a road swingarm or on aftermarket ones. Just sold my 10 spokes perfectly refurbished wheels for £200 each on ebay. Gutted, they owed me a lot more than that. Sold a Dymag rear a long time back for £120. |
thanks for the "you wont find one" advice, but Ive been offered a pair of 16.5 marvics with road hub fitment for £400 ,but don't need/cant afford both Thanks also for the "you need to find a mag Corse arm" advice ,but Harris are making me a long arm for £250 ,the same as they made for Moto Cinelli and others in the day Don't really need magnesium or Corse type lables for club racing |
Quote:
Can you stick a picture up of the finished job? I assume that the rocker is the same but the shock needs revalving due to the increased leverage? |
Quote:
Pretty much My 996 has the Spondon extended swingarm (Ray Stringer had a batch made) uses a standard rocker linked to a adjustable length Penske shock with high and low speed damping. All works very well. When the 995 used the Spondon arm at the IOM it was using a Koni shock built to suit by Maxton. 2nd in the Senior Manx seems a fair reflection of how well it worked |
im selling a 748RS 54mm full system that should work well. Sent you a pm with details. Cheers There are some odd bits kicking around if you look hard enough I have a mag eccentric for a road arm. It was made for Foggy for the 1994 WSB when he hated the stability and they lengthened the stonck alloy swingarm prior to creating the mag long arm. |
All times are GMT +1. The time now is 02:17. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK