Wanted for my 998R 1 Attachment(s) Ohlins R&T Caliper Mounts for 108mm radial calipers Anyone know where I can get a set of these seperate from the forks I currently have the mounts that take my 4-pad 65mm mount calipers, but want to swap to my AP radials along with AP race discs fitted to a Narrow track front wheel |
Show off!!! |
Must have money to burn;) Think these are what you are looking for Kev, well maybe http://www.motowheels.com/italian/myproducts.cfm?parentcategoryid=116%7CDucati%20Bra kes&productID=3837&showDetail=1&categoryID=540|Bra ke%20Caliper%20Mounts%20%26%20Adapters&vendoridtod isplay=0&filterFor=&collection=168%7CEuropean%20Mo torcycle%20Parts http://www.motowheels.com/italian/myproducts.cfm?parentcategoryid=116%7CDucati%20Bra kes&CategoryID=540|Brake%20Caliper%20Mounts%20%26% 20Adapters&collection=168%7CEuropean%20Motorcycle% 20Parts Not exactly cheap mind you:lol: Chris:burn: |
998r with an AP Radial set up I'm off to the bathroom...........;-) |
1 Attachment(s) Quote:
Cheers Chris I had been to that link a few months ago but they were saying they were out of stock Could do with the Exchange rate improving a bit more, May have to be my Xmas present to myself at $575 and I'm hoping thats for the pair At $70 I'll make my own spacers |
Skiddles, what RT forks do you have? I have the ones with the side screws, as in this pic: Alex Ortner makes a set of radial fork bottoms which he used to fabricate for US based Cyclecat. They´re plug and play. I don´t understand why you would want 108mm over 100? Are you running race Brembos or cheap Tokico shyte? I´ll see if I can find a pic of Alex´s bottoms. |
2 Attachment(s) Here we go, this is Matthew Smith´s bike (read more about it on http://www.visi.com/~moperfserv/road_trip.htm ). Alex Ortner told me the following: Quote:
the old CC price apparently was something around 325 US$. If you´re buying, I am interested in a set for my bike. Maybe we can do a small group buy or something. |
Quote:
Looks like it is for each one:( , would have thought so as a pair to fit Showa forks are $900 + :( Chris:burn: |
2 Attachment(s) Quote:
For the Showas you have to buy the complete fork Bottom casting just as you do with the earlier Ohlins R&T forks with the side mounted caliper bolts, so I would expect them to cost a fair bit more, as I have the FG320 forks the lower part already allows for a range of different brackets to be fitted A few years ago I purchased some New AP Radial Calipers through Harris Performance with the intention of fitting them to 108mm Magnesium mounts on the bottom of a set of works RGV500 Ohlins forks I have, I spoke to Steve Harris at the Ally Pally Show and he popped around to the AP stand and sorted me a good Price. Since then they have only been used a couple of times and that was on Dallas's Ex Superstock 2004 Yam R1 |
did you already check http://www.motocorse.net/homeing.asp...s/attacchi.swf or www.motocorse.net also here http://www.partsplanet.it/ita/dettaglio.asp?ID=526 |
All times are GMT +1. The time now is 14:45. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK