Meta 357T problem. I have a Meta 357T Cat 1 alram on my 748. I had to disconnect the rear indicators and I think one of the leads must have touched the frame. Problem I have is that where as before the indicators used to flash once or twice when activating / deactivating they don't do that anymore and the only hint I get is when I turn the ignition key it beeps when the alram is on. My main concern is that I immobilised the bike and about 30 seconds later with the bike on its stand not being touched, the alram went off. As the bike is in my Mums garage and I don't live there I am not sure what I should do. Heeeeeeeeeeeeeeeeelp. Thanks Juckky |
I have a customers bike in that appears to act the same. It had gone over on one of the indicators. There's some srt of error indication via the LED I think. It's been tested at a Meta dealer and the PCB is shot. I'm fiting a datatool ;) |
There destructions for the 357T are here, if its any help. http://www.ducatisportingclub.com/xm...10687#pid88218 Mine has been playing up recently too - it even stranded me in town for a couple of hours (and cost me £14 in new batteries for the remote!) but I think it was down to a weak battery. |
All times are GMT +1. The time now is 00:53. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK