Brembo lever pin ?
 

Anyone know where I can get the pin shown in the picture, I have bought a replacement clutch lever which did not come with the pin. The old one is solid and will not come out and Ducati do not do them seperatly wanting £80 for the whole thing.



Craig

There's some help about removing the pins here - lots of them have (hidden) screws you have to remove first!
http://www.webbikeworld.com/t2/pazzo...ble-levers.htm

But otherwise I think you're looking at buying the whole lot second-hand off ebay, tbh.

Just found this on a google:

http://www.af1racing.com/store/scrip...idproduct=7756

OMG 32 bucks from the USA..
MIne has the screw in plane sight. Just its stuck solid.
Thx though Ant

Craig

I guess it's seized over time and probably been loctite'd into place as well.

Could you cut it from the OEM lever to use in the new lever, or can you only fit it by taking it apart?

Craig, I have a spare one. It's been seized on the little grub screw but I drilled and tapped it from the othrer side and it works fine. Yours if you want it? Just PM me your address mate.

Neil