Ohlins suspensions for my new project on 996 Hi I am looking for Ohlins suspensions for my new project on 996,the question is can i use the Ohlins from 999s for my 996. I know that front fender does not fit right way,and i know at the lower triple ohlins are 56mm and the showa is 53mm. I am interested to know if the calliper alignment will be an issue with my 996. Thank you |
You may find the calipers are out of alignment as the 999 uses discs with a 15mm offset, just as the 748R did. So the easy option is four 5mm spacers to go between the caliper and the fork leg and 5mm longer M10 x 1.25 caliper bolts |
Quote:
If someone sell OHLINS forks for 784-996-998 that will be good to… |
Hey guys, I finally found what i was looking for ! Can I use the Showa 25mm axle for this Ohlins forks ? Thanks ] |
Yes, standard spindle will fit |
Quote:
Thank you !!! cheers |
1 Attachment(s) A photo of the front end in my 996 taken last weekend, which is how I know the standard spindle fits |
Quote:
Nice |
All times are GMT +1. The time now is 08:40. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK