Datatool system 3 up in smoke Not run the 998 for a while and went to start it at the weekend and as soon as I put the ignition on the alarm fizzed did a decent impression of a smoke generator.:( Looks like it needs a new PCB. Anyone got any spares lying around? Ray |
Before you go for a new PCB Ray, get the wiring checked. There shouldn't be enough feed to the alarm to smoke it. There could be a feed from one of the immobalised circuits....fuel pump for instance?? Or get it cut out and bin it ;) |
Thanks for the advice Nelly, I was all too ready to blame alarm for the meltdown, it was playing up already with the siren losing a lot of volume. I'll check out wiring before I connect up a replacement pcb. I did consider removing it completely but a new PCB looked to be an easier option. Ray |
Unless you really need it Ray, I'd cut it out and make good. I've done 2 or 3 already this season and it's doesn't seem to be as big a thing with insurers nowadays. Best protection is a tacking unit tbh. It's the future ;) |
Nelly cut mine out last year, best thing I had done, and no increase in my insurence premiums!!!!!!:D Chris:burn: |
|
I've got what looks like to be a similar circuit board, just not got round to trying it properly yet. Just not got the time or the inclination for two wheels in the depths of winter...................not sure I will have in the summer either, :eek: :D The lad is more interested in four wheels than two so I'm in no great rush to fix the thing. Ray |
All times are GMT +1. The time now is 06:47. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK