A call to my Essex friends Anybody smart enough to remove a ******* Allen screw that has stripped. It had to be the one nearest and close under the hinge of the fuel filler cap.(749) Tried whacking anti clock with a flat blade, tried to grind so I could use a flat blade driver but Can't grind propertly because of sparks etc. Can only a see a quick spot weld of a tool onto it but who wants welding type stuff near the fuel tank opening |
If it was me, I'd use a dremel with a very small drill bit - drill through the centre (v. Slowly) and it should then collapse in on itself... suck out the rubbish with a hoover. Works a treat!!! |
Did think that but because it's the screw close to the hinge section there is no room |
Take a picture as it might help with ideas? |
Quote:
|
All times are GMT +1. The time now is 04:01. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK