998 brake hoses on 996? In the process of replacing the calipers on my 996 BIP with 998 ones. Obviously i need new brake lines so my question is - will 998 twin line ones be the correct length for my 996 or will i need to get set custom made? cheers Simon |
ones for a 998 should fit OK, I take it you mean your fitting 998S/998R calipers as the 998 Bip ones are the same as the 996 Bip. Mastercylinders are also the same |
Quote:
Yes the 4 pad ones. Cheers Simon |
Quote:
So would you say that is was these ones; http://helperformance.com/store/prod...oducts_id=3974 and not these ones? http://helperformance.com/store/prod...oducts_id=3931 They are both two line ones and are the same price, so would the difference be the type/angle of fitting and/or the length of the line? Cheers Simon |
It will be the ones for the 998S, the 998BP 2-Pad calipers with the two retaining pins have the banjo bolt screw in from the top. the P4 4-Pad calipers on the 998S have the banjo bolt screw in from the side, which means the lines are a little longer and the Banjos are at a different angle |
Quote:
Thanks for the info. I'll order the S ones then. Cheers Simon |
All times are GMT +1. The time now is 23:26. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK