Db Killers
 

Hi all, trying to remove my db killers on my s2r termi's. Is it just a matter of pulling them out or is there more to it. I have tried pulling them out but they will not move.

I would be grateful for any tips.

regards

greg.

You did take the bolt/rivit out first,did you?:rolleyes:
Seriously tho,those Termig baffles are notoriously difficult to remove.Sometimes its better to remove the can and knock them out from the other end.

Without removing the cans - Fit some mole grips to the long end of an allen key. Hook the short end of the allen key around the vertical bar on the baffle. Then whack the mole grips with a hammer. Worked on mine. Seems that the short sharp shock does the trick better than trying to grip the baffle with pliers and pulling it out.
Regards
Neil