Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   1198 / 1098 / 848 (/forumdisplay.php?f=177)
-   -   Removal of brake and clutch leavers (/showthread.php?t=294533)

Dougie748 27-Mar-2014 20:55

Removal of brake and clutch leavers
 
Just been out at my Ducati 848 to change the original leavers to shorty type.
When I took of the brake leaver I couldn't remove the round part that goes into the rubber grommet from the leaver.
Can anyone help here please?

skidlids 27-Mar-2014 22:39

Pretty sure its best to punch out the Dowel that holds the two parts of the lever together and that the pivot bolt passes through.

Dougie748 27-Mar-2014 23:39

Quote:

Originally Posted by skidlids
Pretty sure its best to punch out the Dowel that holds the two parts of the lever together and that the pivot bolt passes through.


Thanks skidlids, I'll give it a shot tomorrow.

skidlids 28-Mar-2014 00:01

Quote:

Originally Posted by Dougie748
Thanks skidlids, I'll give it a shot tomorrow.


I have one to do as well following Pete Pritchard getting knocked off at Brands

Dougie748 28-Mar-2014 13:50

Quote:

Originally Posted by skidlids
I have one to do as well following Pete Pritchard getting knocked off at Brands


Cheers skidlids managed to get pivot out and leavers fitted.
Clutch leaver feels a little tight though.


All times are GMT +1. The time now is 11:58.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK