Wanted 600 carb flywheel rotor Would anyone have, or know of anyone who has a 600 carb flywheel rotor to sell? Thanks |
Do you have a pic of the part you need |
I haven't had chance to get to it to take a pic. Its the magnetic rotor that spins inside the stator. The link below shows it, its in the bottom left corner of the drawing. Thanks http://www.stein-dinse.biz/eliste/el...6ebeb36g&lg=de |
I'll have a check to see what I have, similar to the early 748 and 916 but narrower if I recall correctly but without measurements it is probably hard to tell one from the other |
Yes you're right they are smaller. I'll look to see if I can find the dimensions again. Thanks for your help |
What year 583 is it? Marcus Dealey may have an early one in a box with the rest of a dismantled engine. |
The engine is a 95 model. Thanks |
Rotor size. OD 76mm ID 19mm Depth 38mm Approx. |
I think it is the depth that is the dimension that varies between the models I will see what I have |
That would be great, I'm really keen to get back on it while the weathers still good. Thanks |
All times are GMT +1. The time now is 07:28. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK