Ducati Sporting Club

Ducati Sporting Club (/msgboard.php)
-   Technical - Help or Info - NON Motorcycle (/forumdisplay.php?f=196)
-   -   Advice on fitting/Removing Db killers (/showthread.php?t=79163)

Dukeman358 16-Apr-2009 06:26 PM

Advice on fitting/Removing Db killers
 
Had a go at fitting these to my Termi's but they need ramming in which makes getting them out impossible without large mallet and grips.

Is there any way of improving this as not to cause them to come out involuntary?:confused:

Dementor 16-Apr-2009 07:59 PM

Quote:

Originally Posted by Dukeman358
Had a go at fitting these to my Termi's but they need ramming in which makes getting them out impossible without large mallet and grips.

Is there any way of improving this as not to cause them to come out involuntary?:confused:


Use this on the baffles and to get rid of any burring inside the pipes, just be careful afterwards not to push then right into the can.


Dukeman358 17-Apr-2009 12:56 PM

Quote:

Originally Posted by Dementor
Use this on the baffles and to get rid of any burring inside the pipes, just be careful afterwards not to push then right into the can.



Do I have to use one without a handle??:confused:

As I have the 70mm system......I don't have any burring!:rolleyes:


All times are GMT +1. The time now is 07:49 AM.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2017, Jelsoft Enterprises Ltd.
© Ducati Sporting Club