Ducati Sporting Club UK
Showing results 1 to 50 of 66
Search took 0.01 seconds.
Search: Posts Made By: stephens
Forum: 999 / 749 23-Dec-2004, 14:04
Replies: 6
Views: 1,976
Posted By stephens
How will this work with the race shift? You need...

How will this work with the race shift?
You need to bite the bullet and buy the Ducati QSG. This attaches directly to the splined gearshift selector output shaft, since the race shift doesn't use a...
Forum: 999 / 749 12-Apr-2004, 14:00
Replies: 21
Views: 5,367
Posted By stephens
Someone looking for CF race fairings.

Someone looking for CF race fairings.
Forum: 999 / 749 12-Apr-2004, 10:28
Replies: 21
Views: 5,367
Posted By stephens
spyke Sorry I obviously need new contact lenses!...

spyke
Sorry I obviously need new contact lenses! I amlooking for carbon race fairings, the glass ones don't protect the bike properly (water pump etc) when the bike goes...
Forum: 999 / 749 31-Mar-2004, 15:48
Replies: 21
Views: 5,367
Posted By stephens
These are race fairings....

These are race fairings.

http://www.ipn.com.au/mbworld/ipnduc3.jpg

[Edited on 31-3-2004 by stephens]
Forum: 999 / 749 26-Mar-2004, 13:45
Replies: 19
Views: 6,406
Posted By stephens
I run a 190/55 on the street and 190 or 195/60...

I run a 190/55 on the street and 190 or 195/60 slick for the track. I also have a 6" rim to suit. With a 5.5" rim, the proper tyre fitment is a 180/55. A 190/50 as fitted standard is the wrong...
Forum: 999 / 749 26-Mar-2004, 13:37
Replies: 21
Views: 5,367
Posted By stephens
Who told you they were Corse fairings? They are...

Who told you they were Corse fairings? They are not even remotely like Corse items.
Forum: 999 / 749 05-Mar-2004, 21:36
Replies: 1
Views: 2,533
Posted By stephens
The system comes with detailed installation...

The system comes with detailed installation instructions. I installed the 57mm system on my bike with a friends help in less than 2 hours.
Forum: 999 / 749 02-Feb-2004, 14:26
Replies: 14
Views: 3,755
Posted By stephens
The PCIII USB has individual cylinder mapping...

The PCIII USB has individual cylinder mapping which is essential to maximise power gains from your bike.
Forum: 999 / 749 02-Feb-2004, 07:31
Replies: 14
Views: 3,755
Posted By stephens
The Corse ECU removes the sidestand interlock and...

The Corse ECU removes the sidestand interlock and increases the rev limit to 11900. I understand John Hackett can organise the increased rev limit on your current ECU for a much lesser amount.
Forum: 999 / 749 02-Feb-2004, 07:13
Replies: 9
Views: 2,855
Posted By stephens
Further news on the airtubes I received my newly...

Further news on the airtubes
I received my newly gasflowed heads last week and have made some interesting observations.
Stock each 999S heads/inlet flow 123lps or 260cfm at 25" of water
Each airtube...
Forum: 999 / 749 01-Feb-2004, 11:41
Replies: 9
Views: 2,855
Posted By stephens
Anyone had experience with Carbon World? I am...

Anyone had experience with Carbon World? I am considering the airtubes, but have never heard or dealt with them before.
Forum: 999 / 749 26-Oct-2003, 00:19
Replies: 14
Views: 3,076
Posted By stephens
That is $5000 AUD or around 2000 pounds

That is $5000 AUD or around 2000 pounds
Forum: 999 / 749 25-Oct-2003, 17:06
Replies: 14
Views: 3,076
Posted By stephens
If you had paid $5000 for an exhaust system, you...

If you had paid $5000 for an exhaust system, you wouldn't find it so amusing.
Forum: 999 / 749 21-Oct-2003, 23:16
Replies: 14
Views: 3,076
Posted By stephens
Mine has cracked in the identical location, must...

Mine has cracked in the identical location, must be a design problem.
Forum: 999 / 749 21-Oct-2003, 04:02
Replies: 14
Views: 3,076
Posted By stephens
Yes the D57 is the termignoni exhaust system with...

Yes
the D57 is the termignoni exhaust system with ti muffler.
Forum: 999 / 749 20-Oct-2003, 07:29
Replies: 14
Views: 3,076
Posted By stephens
My ti muffler has cracked badly as well. Sounds...

My ti muffler has cracked badly as well. Sounds like there may be a design problem.
Forum: 999 / 749 03-Oct-2003, 11:17
Replies: 31
Views: 7,346
Posted By stephens
News just in, new cam timing has produced a...

News just in, new cam timing has produced a significant power increase, both midrange and top endwith the 57mm termi system. Have been told to expect a final run of 146-147 when I pick up the bike...
Forum: 999 / 749 01-Oct-2003, 12:39
Replies: 31
Views: 7,346
Posted By stephens
Yes The ECU can be reprogrammed. I was given the...

Yes
The ECU can be reprogrammed. I was given the choice of having mine re-programmed or taking the Corse unit through the Australian race team. John Hackett at JHP can organise this too.
Forum: 999 / 749 30-Sep-2003, 21:28
Replies: 31
Views: 7,346
Posted By stephens
tongpo The dyno's are the same make and...

tongpo
The dyno's are the same make and model. The figures displayed are corrected for the ambient conditions. My actual uncorrected power no was 143hp on that run. T?hat is not to say that...
Forum: 999 / 749 30-Sep-2003, 14:51
Replies: 31
Views: 7,346
Posted By stephens
The 999 had 996R cams. It's funny, but I...

The 999 had 996R cams. It's funny, but I appear to have more data on 999S performance tuning than the Aust factory team!!
Forum: 999 / 749 29-Sep-2003, 21:58
Replies: 31
Views: 7,346
Posted By stephens
Don't sell your system yet, this is almost...

Don't sell your system yet, this is almost identical to my tuned (PCIII) asymetrical Termi results.
The results are also in DIN not SAE. You need to multiply by .986 to convert.
I will post a...
Forum: 999 / 749 27-Sep-2003, 15:50
Replies: 12
Views: 3,706
Posted By stephens
Update on Barnett clutch. The clutch blew while...

Update on Barnett clutch. The clutch blew while dyno tuning, it did not have enough clamping power for the 999.
Forum: 999 / 749 23-Sep-2003, 22:33
Replies: 9
Views: 2,603
Posted By stephens
I have to interject here and state that so far...

I have to interject here and state that so far the asymetrical system produces MORE power than the 2-1-2. I will see in the next two days when my PCIII mapping is complete the real advantage of the...
Forum: 999 / 749 22-Sep-2003, 06:36
Replies: 5
Views: 2,496
Posted By stephens
neill just checked, there is no PCIII USB...

neill
just checked, there is no PCIII USB specific documentation on the CD, only the stuff that is on the net.
Forum: 999 / 749 21-Sep-2003, 21:51
Replies: 5
Views: 2,496
Posted By stephens
My mistake, the installation guide is available...

My mistake, the installation guide is available under the PCIII application. I will email you the manual tonight, if I remember.
Forum: 999 / 749 21-Sep-2003, 14:21
Replies: 5
Views: 2,496
Posted By stephens
Neil I don't know where you got your info...

Neil
I don't know where you got your info from, but everything is available from www.powercommander.com
I have a PCIII USB and downloaded everything from the net before the unit was actually...
Forum: 999 / 749 20-Sep-2003, 11:23
Replies: 31
Views: 7,346
Posted By stephens
I discovered a special tool required to fit the...

I discovered a special tool required to fit the 54 and 57mm exhaust systems, with proper swing arm clearance. Thanks to Tony at Ducati Melbourne, I was shown how to mount the link holding the...
Forum: 999 / 749 20-Sep-2003, 11:12
Replies: 12
Views: 3,706
Posted By stephens
I just pulled my DP carbon clutch pack out and...

I just pulled my DP carbon clutch pack out and replaced it with a Barnett set. The noise has gone along with the clutch grab. The Barnett clutch is much better for road/track usage. The DP carbon...
Forum: 999 / 749 16-Sep-2003, 22:39
Replies: 31
Views: 7,346
Posted By stephens
The pipes are very sensitive to cam timing. They...

The pipes are very sensitive to cam timing.
They lose out on power1-2hp compared to the 54mm system under 6000rpm and produce that much more thereafter.
The Power Commander has not arrived yet, so I...
Forum: 998 / 996 / 916 / 748 13-Sep-2003, 23:28
Replies: 7
Views: 1,504
Posted By stephens
A couple of quick questions; 1. Was it slipping...

A couple of quick questions;
1. Was it slipping at all before you lost drive completely?
2. Does the clutch lever action still work properly? (The slave cylinder may have seized)
Forum: 999 / 749 13-Sep-2003, 23:23
Replies: 12
Views: 3,706
Posted By stephens
Next time you post a technical question, do a...

Next time you post a technical question, do a search first to see if it has been dealt with previously. There is an old post from a week or so on this exact issue. Just search for "slipper clutch",...
Forum: 999 / 749 13-Sep-2003, 09:02
Replies: 8
Views: 3,138
Posted By stephens
Keefyboy The Casoli system appears to be the Leo...

Keefyboy
The Casoli system appears to be the Leo Vince system. If anyone is interested I have some more detailed info that I can email.
Forum: 999 / 749 12-Sep-2003, 23:00
Replies: 8
Views: 3,138
Posted By stephens
leo vince. Steve Cramer Products has bought a...

leo vince. Steve Cramer Products has bought a couple of the systems in for the show in Melbourne. They are the sponsors for most of the 999S Superstock racers.
Forum: 999 / 749 12-Sep-2003, 15:19
Replies: 31
Views: 7,346
Posted By stephens
The system is a Termignoni, I purchased it...

The system is a Termignoni, I purchased it through JHP. The quality of the welds on the outside looks fine, it is the inside that is terrible.
I used a carbide tip with an air powered high speed...
Forum: 999 / 749 12-Sep-2003, 04:02
Replies: 31
Views: 7,346
Posted By stephens
After lots of annoying people, I decided on the...

After lots of annoying people, I decided on the 57mm termi system, then discovered that I would probably be waiting months for the kit to arrive.
I called JHP Ductai in Coventry UK, initially for...
Forum: 999 / 749 07-Sep-2003, 10:45
Replies: 9
Views: 2,530
Posted By stephens
The wheels are available from Moto Wheels online...

The wheels are available from Moto Wheels online for $3395USD.

[Edited on 7-9-2003 by stephens]
Forum: 999 / 749 07-Sep-2003, 01:59
Replies: 9
Views: 2,530
Posted By stephens
Carbon Rims for 999

My rims finally arrived after a 6 month wait from BST. Total weight savings of 5kg, 2kg front, 3kg rear. The bike now turns in faster than the GSXR750. It is like riding my TZ250 on the street,...
Forum: 999 / 749 02-Sep-2003, 23:07
Replies: 29
Views: 6,457
Posted By stephens
Buy a double bubble screen. I am 5'11"...

Buy a double bubble screen. I am 5'11" and ride my bike regularly at 150+mph at Phillip Island race track with no such problems or concerns.
Forum: 999 / 749 02-Sep-2003, 11:26
Replies: 29
Views: 6,457
Posted By stephens
Dickieducati Forgot to mention in my last post,...

Dickieducati
Forgot to mention in my last post, you may remember that I mentioned a friends 999S with 54mm Termi's dropped in power on the dyno from 136 to 128hp after a cam timing change. As I...
Forum: 999 / 749 02-Sep-2003, 11:17
Replies: 29
Views: 6,457
Posted By stephens
No there is no mix up. This is the dyno for my...

No there is no mix up. This is the dyno for my "old" bike. It started as a 999 producing 118hp at the rear wheel.
I then added the asymetrical Termi, slipper clutch, alloy flywheel, carbon plates and...
Forum: 999 / 749 02-Sep-2003, 07:05
Replies: 29
Views: 6,457
Posted By stephens
No Testing was done with two ECU's 999 Termi...

No
Testing was done with two ECU's 999 Termi and 999S Termi. The 999 Termi ECU produced better power and is what is used in all three graphs shown.
Forum: 998 / 996 / 916 / 748 01-Sep-2003, 14:09
Replies: 12
Views: 3,270
Posted By stephens
The order and type of the plates are identical on...

The order and type of the plates are identical on all DP and Corse slipper clutches even though the plates may be different.
I have all of the RS and DP guides and they all say the same thing which...
Forum: 998 / 996 / 916 / 748 01-Sep-2003, 11:17
Replies: 12
Views: 3,270
Posted By stephens
Sorry To clarify, I had the opposite problem to...

Sorry
To clarify, I had the opposite problem to you. You should have a friction plate first, not a steel with the slipper clutch and finnish with a steel. I have ta soft copy of the 998RS parts guide...
Forum: 998 / 996 / 916 / 748 01-Sep-2003, 07:12
Replies: 2
Views: 1,189
Posted By stephens
Thanks for the feedback. I have setup the...

Thanks for the feedback. I have setup the previous bike after a fair bit of track time. After swapping bikes, I put in 1000 street km's with the setup from the old bike including the old race...
Forum: 998 / 996 / 916 / 748 01-Sep-2003, 02:51
Replies: 2
Views: 1,189
Posted By stephens
9XX Spring Rate Help

I have swapped bikes recently and was running a 9kg spring in the rear. Although it handles well on the track, only 2/3 of the travel is being used and the bike is unridable on any sort of bumpy...
Forum: 999 / 749 31-Aug-2003, 14:12
Replies: 2
Views: 2,888
Posted By stephens
Ducati Issues

Does anyone know whether the 999's are sucseptible to;
Flywheel nut coming loose.
Rockers flaking.
Valve colletts wearing/breaking.

I was under the impression, with the reduced valve/timing...
Forum: 998 / 996 / 916 / 748 31-Aug-2003, 13:56
Replies: 12
Views: 3,270
Posted By stephens
I have/had similar issues with my 999. My bike...

I have/had similar issues with my 999. My bike was only engaging at the very end of the clutch let out and rather than shim, the mechanics used a couple of my standard steels which are thicker than...
Forum: 999 / 749 28-Aug-2003, 11:38
Replies: 5
Views: 3,210
Posted By stephens
Good to hear!:) Mine is predominantly a track...

Good to hear!:)
Mine is predominantly a track bike that sees around 25 track days a year, but not much else. We're just coming out of winter here in Australia at the moment, with the track...
Forum: 999 / 749 28-Aug-2003, 09:50
Replies: 5
Views: 3,210
Posted By stephens
999S Modifications

Some of you may have seen my posts regarding performance mods on the 999 previously.

I see the internet and these forums in particular as a great way of sharing information.

If anyone is serious, I...
Forum: 999 / 749 28-Aug-2003, 09:33
Replies: 12
Views: 3,367
Posted By stephens
It looks MUCH better. As suggested though, would...

It looks MUCH better. As suggested though, would be better with the Corse magnesium job, but can't be beaten for wow factor!

From a performance/handling perspective IMHO it is a step backwards,...
Showing results 1 to 50 of 66

 
Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 00:56.