View Single Post
  #3  
Old 23-Aug-2015, 01:49 PM
STEVENSON-KAATSCH STEVENSON-KAATSCH is offline
Registered Forum User
Newbie
 
Posts: 2
Join Date: Aug 2015
....side-stand switch....

....just looked at the first bit of the question. No need to be sophisticated, just remove the switch unit from the side stand after determining where 'off' is (when the stand is up) and glue/cable-tie/sticky-tape it in position, then cable-tie the loose wires away from moving or hot things. Job done.
Reply With Quote