I swapped over the standard cans and ECU on our 998BP on Saturday, for a set of Termi's with the link pipe and the ECU that came with them (marked 996r). These came with the bike. Now the increase in noise was very noticeable, but then again it is a much bigger tube with no baffles in there to slow down the gasses. I think the exit hole has gone up from 27mm to 50mm and there is a big difference in the link pipe internal dimensions. I managed to ride it properly for the 1st time yesterday. The pull out on the open road is definately improved, I could feel the tyre moving about. The mixture control however low down did give me a few problems in town traffic. I have to say that the standard set-up is a lot easier in traffic. So I think we are going to need some dyno time and a power commander to smooth things out over the winter. |