View Single Post
  #4  
Old 12-May-2014, 06:16
dunlop0_1's Avatar
dunlop0_1 dunlop0_1 is offline
Registered Forum User
Big Twin
 
Posts: 1,568
Join Date: May 2009
As Kev said. Also are you sure the closer shims are seating correctly. Once they have been out even with the original half rings they can sometimes need quite a bit of persuasion to seat correctly.

Also do not try and make a measurement/adjustment for both opener and closer at the same time. Do the closer and then the opener.

Quote+Reply