Thanks for the info guys and I assume the overtightening screws is talking from experience!! I haven't had time to get near it tonight but I intend to strip it down to stop the jerking it give me every now and again as it can cause the engine to stall. Sometimes when I pull away you can feel it slip but only for a split second, the revs don't go up (that I notice), it just give a short squeek and lunges a bit, which is usually when I give it a bit too many revs when pulling away. This can sometimes lead to it stallling as it snatches. I'm assuming that its correct to be putting the blame down to the clutch. |