Thread: Arrow exhaust
View Single Post
  #14  
Old 18-Oct-2003, 03:03
rockhopper's Avatar
rockhopper rockhopper is offline
Registered Forum User
Ducati Corse
 
Posts: 3,367
Join Date: Jul 2001
For the sake of £40 or so its worth doing the whole job and getting it set up right. I've got cored standard cans on my bike and the JHP chip and Nellys set up has made a huge difference. I ran it on the standard chip for nine months and i thought it was okay but nothing special. Nelly set it up still on the standard chip and it was transformed. Went from 50mpg to 62 mpg. The JHP chip and set up has made it smoother everywhere, especially at low revs.

Interestingly my standard cans are made by Arrow.

The sticker on the ECU could also have been removed to twiddle the trimmer pot in there so that isnt always a good guide. The only way is to tell is to take the bung out and look at the number on the chip then give JHP a bell.
Quote+Reply