Quote:
Originally Posted by Swinz Well, after much humming and argggghhhing i decided to go for broke and got me some Ohlins forks. Worked out that by the time i did all i wanted to do to the Showa's, it only cost a couple of £100 more to get the real thing. Now all i need is the bottom yoke and stem............... |
I fitted a set of Ohlins R&T radial forks off a 999R onto my 748 using the stock yokes. You just need to get the bottom yoke bored to suit. I know someone that can do it for you based in the South East. He did a superb job on mine.
I then sourced a set of 15mm offset discs and had a spacer made up for the wheel spindle to get the alignment correct. Was actually very simple to do.