View Single Post
  #1  
Old 07-Apr-2014, 17:29
Awwwffs's Avatar
Awwwffs Awwwffs is offline
Registered Forum User
Newbie
Bikes: ST2, Custom Harley and a Fightered Exup
 
Posts: 9
Join Date: Apr 2014
Mood: pretty chilled. Even when it comes to the Duc giving me Grief :)
Yet another Spyball

Hi folks.
I had the SpyBall AM/8510 fitted to my ST2.
Took it off because it didn't work and kept flattening the battery plus the four indicators would stay on even with the key out the ignition.

So out it came. The unit sits under the seat and was spliced into the loom next to the computer. Bike ran ok when it was fitted, i followed the wires and cut each one. Started the bike, it was fine. Removed the unit and tidied the wiring and now the bike wont start.
It'll turn over all day long but wont fire up, pump primes up when the ignition is switched on ok.
Is there a separate immobiliser or something elsewhere on the bike that isn't letting it start?
Thanx in advance
Dave
Quote+Reply