Nemesis ECU will work happily even if the clocks are coded as it ignores the IMMO part so i'm a bit worried when you say the dash has been decoded to work with a Nemesis as its not a requirement. So far I have fitted 1098 Nemesis ECUs to two Desmo Due race bikes along with stripped down looms and 2nd hand dashes from a 1098. if you have had the IMMO removed from the replacement dash then I would have thought the standard ECU would be OK. Bit like fitting the Virgin ECU on my 620 a couple of years back, providing a standard dash was fitted it would run with or without the clocks being coded providing the coded ones (IMMO function operating) had the the keys transponder to read from. I may be wrong here but as far as I know a Virgin ECU is not the same as a ECU with the IMMO off, its just NOT yet been coded but still requires a signal from clocks Checkout the Desmo Due Paddock on Facebook |