| Mark,
My 888 was similar but a 20min tune up sorted it out. If you want to take a peak down the inlets you should be able to see if they are basically opening at the same rate. It's really senstive from tickover through the first few thousand RPM on a very light load. Try it and you'll see what I mean. You hardly have to open the throttle at all. Get a couple of 3 or 4mm drills. One in the horizontal body and you should have the ame gp in the vert. TAKE CARE NOT TO DROP THE DRILLS THOUGH!!!!!!!!!!!!!
Good luck,
Rgds, Rob |