View Single Post
  #3  
Old 02-Sep-2009, 14:50
KeefyB KeefyB is offline
Registered Forum User
WSB Hero
 
Posts: 7,600
Join Date: May 2002
Mood: Lurkin'.....
Quote:
Originally Posted by skidlids
ON a 748/916/996/998 its
Remove pump then get small screwdriver in the tank and remove the two screws that retain the catch bit and remove catch from the bottom of the filler cap
Thats not possible on the 749/999.The cap lock locates in a 'well' on the plate and the screws are not accessable from the bottom of the tank.
Your best bet would be to knock out the small roll pin where the cap hinges.With this out of the way,you might be able to pull/push/jiggle the cap out.
Quote+Reply