Quote:
Originally posted by jobr
Quote: Originally posted by HW
Hell, that took some finding again!
http://www.autoreg.net/
I had a 7x5 carbon plate from them, which was quite a think chunk of carbon. You get the carbon showing through the numbers and around the edge (the yellow covering is just cut away to reveal what is underneath it).
(hope that wasn't stating the obvious)
Henry |
Henry, dropped autoreg an email last night about a carbon plate, but sadly they have sopped making them! |
Damn! And I was going to get a replacement one. Mine has the two top corners ripped off when it got caught on the wheel. The trouble with that Evolutione plate relocator is that the bit that holds the plate bracket is somewhat flimsy. Mine has been bent back into place after getting caught so many times I am wondering when it will work harden and break. THEN I'll be in trouble because the plate will just fall off somewhere on the road. What I liked about the 7" wide plate was that it was the same width as the rear of the bike (on 749), so it looked really neat from behind. The std plate sticks way out. But you knew that!
Henry