916 SENNA GENERAL INFORMATION
Year Produced 1995-99
ENGINE/TRANSMISSION
Displacement, c.c.: 916.00 ccm (55.89 cubic inches)
Engine type: 90 degree V-2 or V-TWIN four stroke
Stroke: 66 mm
Bore: 94 mm
Compression ratio: 1:11
HP (kW): Horse Power 105.00 (77.2) @ 9000
Torque - Nm (kgf-m / ft.lbs): 90.00 (9.2 / 66.4) @ 7000
Max r.p.m: 10,000 r.p.m.
Valves per cylinder: 4. Desmodronic
Cooling system: Liquid
Gears: 6
Final drive: Chain/DID Type/525HV Links/94
Starter system / ignition: Electronic/Fuel Injection
CHASSIS/DIMENSIONS
Front brake(s): Dual disc drilled/cast iron fully floating 320mm. Brembo Calipers
Rear brake: Single disc 220mm. Brembo Caliper
Front Wheel: Brembo 3.50x17 Alloy 3 spoke
Rear Wheel: Brembo 5.50x17 Alloy 3 spoke
Front Tyre: Tubeless, radial 120/70-ZR17
Rear Tyre: Tubeless, radial 190/50-ZR17
Rear Suspension: Ohlins type DU 3420
Front Suspension: Showa GD051 Stanchion dia. 43mm
Overall chassis length: 2030mm
Overall chassis height: 1080mm
Chassis width to end of levers: 780mm
Rear Sub-frame Alloy
Seat height (lowest setting): 31.1 inches --- 790 mm
Weight (dry): 436.5 pounds --- 198.0 kg
SPEED/ACCELERATION
Top speed: 155.3 mph --- 250.0 km/h
Chris
