| Now thats similar but not the same.
My 748s already has all the Dzus fasteners.
Its recently been serviced and now the lowerleft side of the fairing is sitting on the exhaust and happily melting away.
I've crawled over this bike so much before I know it never used to be like that.
For the life of me I cannot see any way of adjusting its position.
I took it back to my dealer and they are somewhat confused as they could not find anyway to reposition the fairing(or the exhaust) where it would not foul.
The advice was to 'trim' the fairing or stick a big rubber block onto the pad just aft of two threaded holes at the bottom of the engine case. I'm not really happy with either solution.
It only needs about 5mm to clear with ample space.
I'd like to know if you manage to resolve the problem.
Chris |