[james81273]

well i was on it all day yesterday and this morning. there is a very slight fuel problem around 3000 rpm and 4000 rpm (just like the 996 had) but ive put this down to the bike still needing to be run in.

so far the corse rear sets from 996 fitted without any mods except needed m8 bolts and nuts rather than the original bolts as the holes on the frame are off by around 2mm. fork protectors needed a little addition to make them fit correctly but so far so good. As usual the oil cooler has no protection so put some mesh on it to catch/ protect a bit further.

anyway i thought id drop some picies. still smiling