| S'funny that, owned my T8SP4S since 1997 and neither front fork (FG9050)has leaked, ever. Only stripped, checked and seals replaced after Oct 05 front end smash when the front wheel was pushed against the rad'. Forks not bent, frame was. Hard ride on the front due to track springing, but a lot can be dialed out.
The rear shock is spot on, only change was a 10% reduction in spring rate and softening up the comp and rebound.
I can't knock 'em. I do make a point of carefully removing the crapola that
gets under the dust seals though, as that balls up and causes inner seal failure.
Ains. |