| Any settings on the front forks should be identical for both legs.
I would set everything back to the standard settings and make any adjustments from there.
The difference in rings means that one fork leg is being preloaded more than the other.
I've just read your post again and seen that it's the rings above the top yoke your talkin' about!!!!!
That means that the fork legs aren't aligned correctly in the yokes.
You really need to get it looked at/sorted mate. Either the front end has been put back together incorrectly or the leg isn't being clamped by the yokes properly and is slipping.
If you pulled the axle out, the legs wouldn't line up!!
[Edited on 28-5-2003 by nelly] |