Quote:
Originally posted by Gizmo
I removed and refitted one last night just by turning the rubber nut and holding bolt with my finger, maybe I need to check how tight all of them are  think i'll stick a dab of lock tite on. |
I think if you stick a dab of locktite on thenm you will never get them off again! Better to sitck a dab of red rubber grease on them so they will not seize up!
I change my screens about fairly often at the moment ... only because I have found afavourite one now and so want it on road fairing and on track day fairing too. I got a set of screen screws from ProBolt that come with the rubber wellnuts (screws are std allen heads). I didn't have a tool for the original ones and just head the heads with some (masking tape) protected grips then binned them. I'm sick of these special took jobs, no reason for it at all.
<flame away boys>
