| Blimey!
Good detail sire - to be honest I cant remember last month nevermind last year.
I think the reason around the pipe change is that I'm using a non-standard metal filter outside the tank instead of the plastic filter than normally resides inside the tank.
I've had no problems at all with the filter mod - the hardest part for me was trying to work out where to clip/retain the metal filter to, fortunately on my bike the breather hose quickly became an obvious choice.
If going into the tank to renew the filter or do other work I'd recommend moving the filter outside if it can be mounted in a stable way - likewise the POR lining looks the same as when I finished the overhaul.
Cheers - Frank |