Quote:
| Originally Posted by Mykie916 Ok, where do the actual numbers come from, I.e do I go and get them and are they a certain size font etc ? Cheers Myk |
once you know what your numbers will be u can get from ebay or similar or make some any simple font
class b black number yellow background/ class a black on white
acu says;
3. Each machine must display two side number plates. The numbers must be clearly visible to the
public and marshals on both sides of the machine.
5. The figures must be clearly legible and like the background must be painted in matt colours as
described below to avoid refl ection in sunlight.
6. The minimum dimensions of front numbers are:
Background 285mm by 235mm
Height of figure 140mm
Width of figure 80mm
Width of stroke 25mm
Space between two figures 15mm
7. The minimum dimensions of side numbers are:
Background 260mm by 220mm
Height of figure 120mm
Width of figure 70mm
Width of stroke 25mm
Space between 2 figures 15mm
8. A space of at least 5cm must be left free around all number plates in which no advertising may
appear.