It's pretty straight forward. Need to bore the frame to take 12mm bolts. M12x1.75m tap I got a 996 engine loom, throttle bodies and 1.6m ecu. The connector on the 888 bodies is the same but they are wired different. This can be alterered by making a new throttle body loom but it's easier to get on off a 1.6m bike. The nutral light is wired the other way around so that needs a little mod. The altenator id 3 phase; you'll need to junk yours and get a new 3 phase version. That'll come with different connectors, so it's a good time to modify that unrelaible bit of the chassis loom too. Can't think of anything else, no coffee yet, but feel free to ask away. Rgds, Rob Some pics attached too. |