Had a good look and all seems to be okay other than the dash blank and indicators not working. The only way to start the bike is by doing the following. 1 Arm bike with the remote indicators flash once. 2 turn ignition key on and alarm sounds and dash flashes on and off with the alarm sounding. 3 disarm the alarm with the remote. 4 press starter button and bike starts first time but dash still blank and indicators not working. I think it has something to do with the datatool alarm so how do i disconnect it to see if the dash and indicators work? If I just disarm the alarm with the remote then turn the ignition on nothing happens when I press the starter button. The alarm needs to be triggerd in order to start the bike. |