Hey - no problem Paul !
Its only a 35min ride over the back roads - but I am going to adjust the beast's poxy headlight (jacked up rear !) before I bring that over again
Guys - We are open to suggestions as to what (other than a fault in the ign switch) could cause a short on the feed side of the main fuse only when the switch is on.
The short is still there with the connectors to the kill/start switch and the ign/coils disconnected.
Our next step is to drop the reg so we can get at the ign connector block at test there. (I bet monsters are hard to hot-wire cos I couldnt get my fingers in there enough to split the block otherwise !)
[Edited on 20-7-2005 by phil_h]