Quote:
[i]Originally posted by uncledunnie
Picky attached. In case any one is interested my rear end chop was cheaply sorted. Fit a single LED in the remote number plate wiring hole in the main light cluster (£15) and fabricate a simple 80-85 deg bracket to carry the number plate (I used an offcut of 1.5mm stainless sheet), fixed to the rear light mounting bolts between the plastic housing and the heat shield not forgetting some thread lock to counteract the reduced effective threadlength. (The Casoli kit is about £50) |
Or 27 quid from Italia Moto,Lincoln.