Quote:
| Originally Posted by jacknash No 12v at kill switch 7.5a fuse regardless of key on/off, side stand switch removed. Think I have narrowed it down some more. |
Whilst not having exactly the same problem, we are going to have to look at the electrics on my Sons 998S next weekend.
The DataTool alarm had been playing up because of poor fitting and a couple of wires touching. This meant for some reason hat you coldn't turn the sidelights off at all and the battery was going flat.
We have managed to isolate the alarm temporarily on Saturday afternoon - but that hasn't fixed the lights. At the sam time I found that even with the ignition key off and out the lead to the gearbox neutral switch still was showing 12V
Either we have trapped wires somewhere or someone has been at the wiring elsewhere!
We ran out of light on Saturday so will recomence next weekend.
All being well I should have located a wiring diagram by then which will allow us to trace the circuits through.
Your problem sounds like power not getting into the loom from the igniion switch - except for the engine circuit.
Chris