| ok mate, Have the bike up on a swing arm stand first.
Undo and remove the two szus that are near where your kness are when your on the bike.
With an allen key undo the two allen screws that are underneath on the bottom of the fairings joining the two sides together.
With that same allen key, half a turn on the allen headed dzus near to the side stand, and then half a turn on the allen headed dzus near to the front nose.
Now, put your thumb on the nose at the joint with the fairing and grip the top most corner of the fairing with the rest of your hand. ... and feel the two come apart. You will need the stand down to remove the panel completely.
Simple innit................ |