Ducati Sporting Club
Home Calendar Gallery Membership Online Shop DSC Blogs Extras
Go Back   Ducati Sporting Club > Model Specific - Discussion, Technical Problems and Help > 999 / 749
Reload this Page 999 frame measurement please?
Forum Home Register FAQ Search Forum Recent Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-Mar-2014, 08:15 PM
lordmoonpie lordmoonpie is offline
Registered Forum User
 
Posts: 30
Join Date: Mar 2007
999 frame measurement please?

I need some measuring help from a friendly 999 owner if there is one out there please?

I have a 999R frame and an early cast aluminium swingarm. The swingarm spindle is a stock length 267mm shank. When I put the swingarm in the frame, if you look at the bike from the back, there is about 7mm of space between the right side swingarm spacer and the engine so the swingarm slides left to right by as much as 7mm on the spindle itself.

The spindle reaches the frame on the right side but only just and if I put the eccentric aluminium spacers in the frame holes, only the bolt goes through the spacer, not the spindle. That doesn't seem right to me and makes me think I have a frame problem. The frame however is low mileage with no scratches let alone major damage.

Is there anyone with a 999 who can take two measurements for me please? I need to know as you look at the bike from behind, the gap between the right hand engine side and the frame inside, where the swingarm pivot point is and then also the inside frame left to inside frame right distance where the swingarm pivot is.

Maybe my frame is out of kilter by 12mm but it sounds like a lot to me. If so what's the suggestion for straightening it out - anyone had the cause to have that done?

Grateful for any help as my project is stuck until I can sort this out and it's driving me up the wall
Reply With Quote
  #2  
Old 11-Mar-2014, 09:26 PM
Iconic944ss's Avatar
DSC Member Iconic944ss Iconic944ss is online now
DSC Webteam
Webteam
WSB Hero
Bikes: 1993 - 944ss / Aprilia Falco / ST4S
 
Posts: 7,733
Join Date: Oct 2002
Steve might well be able to help...

http://www.bbbfabrications.com/


Cheers - Frank
Reply With Quote
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2017, Jelsoft Enterprises Ltd. - © Ducati Sporting Club - All times are GMT +1. The time now is 07:41 PM.