Ducati Sporting Club

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 28-Dec-2013, 06:27 PM
custard749's Avatar
custard749 custard749 is offline
Registered Forum User
Montjuic
 
Posts: 51
Join Date: Oct 2010
Gearing on a 1098

As I understand it the standard gearing on a standard 1098 is 15 tooth front and 38 on the rear, I would like to change this a bit just to make it a bit smoother at the lower end.
Any advice on what to go for, (not bothered to much about top end speed)
I have heard that it not a good idea to go 14 on the front with a 525 chain???? why is this, or can you?????
Reply With Quote
  #2  
Old 28-Dec-2013, 07:05 PM
nelly's Avatar
DSC Member nelly nelly is offline
DSC Club Member
Ducati Corse
 
Posts: 3,133
Join Date: Jan 2002
Mood: Bloo and Yellow.. and Red now ;)
14t works fine. Chain wear and/or sprocket wear can increase but it's not great in the scheme of things. Poor maintenance will wear them quicker.....
You don't need a new chain or rear sprocket so the 14t front is a very cheap viable way of finding out if you like the change.
When you're ready for a new chain etc. then look at going back to a stock front and up the rear by 3 teeth which will give you about the same ratio but you'd need a longer chain.


.....but better in YELLOW, or Bloo and now even RED

www.cornerspeed.co.uk you know you want to
http://www.nolimitstrackdays.com the best trackday organisers in the UK
Reply With Quote
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2017, Jelsoft Enterprises Ltd. - © Ducati Sporting Club - All times are GMT +1. The time now is 03:12 PM.