Originally posted by keefer http://www.gprdirect.com/epages/GPRD...Catalog/1004/1 no great confusion only Andy who has a different opinion. give them a bell though. and after that I'm still up for the swap as mentioned above. cheers K
Originally posted by khu996 Anyway, rang ever faithfull JHP, who confirmed that the master cylinder bodies are the same, its only the levers that are different.
The master cylinder body establishes the distance between the piston axis and the lever pivot point, so the 19x18 and 19x20 bodies are different by 2mm.
Amazing the amount disinformation floating around...
As I said above the levers are NOT interchangeable. Yes, they'll fit but you'll seriously risk the malfunction of the master cylinder. As Shazaam says the distance is different between the two and that's why Brembo stamps them differently. Do you really think that Brembo would produce different levers if they were interchangeable? Just to be sure, I measured both a 19x20 and a 19x18 just now and it confirmed that they are different.
Originally posted by khu996 Anyway, rang ever faithfull JHP, who confirmed that the master cylinder bodies are the same, its only the levers that are different.
The master cylinder body establishes the distance between the piston axis and the lever pivot point, so the 19x18 and 19x20 bodies are different by 2mm.
OOOooooooooooooooooh a conflict of Guru's.............