1098 bip

banoffee · 27-Dec-2006, 17:09

Is there one? All pics have seen so far are mono (or at least with seat cowl and no rear pegs...)

Gaz 748 · 27-Dec-2006, 17:13

Rear pegs, brackets and seat pad come with each bike

banoffee · 27-Dec-2006, 17:15

ah right, ta. does the S or can they bolt onto the S subframe?

Gaz 748 · 27-Dec-2006, 17:36

The one I saw was an S and that had bracket mounts in the subframe

Bionicle · 27-Dec-2006, 18:10

it dont show the pegs as they were not fitted but it does show the pillion seat

http://forum.alcohol-soft.com/paul/012.JPG

Foot peg mounting points are here circuled

http://forum.alcohol-soft.com/paul/footpegs.jpg

banoffee · 27-Dec-2006, 18:39

thanks

Harry S · 30-Dec-2006, 19:11

Yes, the S comes with all of the bits to make it a Biposto. Ordered my 1098s today and checked out the size of the 'bird table' which will only take the smallest of birds....

I reckon the addition of the pegs will take about 5 minutes and the swap between cover and seat pad, about 10 seconds. Really seems to be the best of both worlds at last....

Simon Reed · 30-Dec-2006, 21:42

They're all bips,@ the mo,steel subframe the lot !,just remove them straight into the bin,as wifes/girlfriends arn't allowed on,or near them,if only to assist applying zymol,its the law !!!

El Toro · 31-Dec-2006, 14:25

They are delivered as single seaters with a cowl fitted but with the seat pad and pegs seperately.

My seat pad and pegs will be going on eBay

twpd · 31-Dec-2006, 21:40

Steel subframe? That's gay. I'm deffo not buying one then - I wanna proper monoposto!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

27-Dec-2006, 17:09	#1
banoffee Registered Forum User Mille Posts: 125 Join Date: Jun 2004 Location: Surrey Mood: Running in 848 1098 bip Is there one? All pics have seen so far are mono (or at least with seat cowl and no rear pegs...) Reply

27-Dec-2006, 17:13	#2
Gaz 748 DSC Club Member Ducati Corse Posts: 3,285 Join Date: Feb 2005 Location: Woking Mood: I feel the need, the need for speed. Rear pegs, brackets and seat pad come with each bike 748R - Less is more ! Reply

27-Dec-2006, 17:15	#3
banoffee Registered Forum User Mille Posts: 125 Join Date: Jun 2004 Location: Surrey Mood: Running in 848 ah right, ta. does the S or can they bolt onto the S subframe? Reply

27-Dec-2006, 17:36	#4
Gaz 748 DSC Club Member Ducati Corse Posts: 3,285 Join Date: Feb 2005 Location: Woking Mood: I feel the need, the need for speed. The one I saw was an S and that had bracket mounts in the subframe 748R - Less is more ! Reply

27-Dec-2006, 18:39	#6
banoffee Registered Forum User Mille Posts: 125 Join Date: Jun 2004 Location: Surrey Mood: Running in 848 thanks Reply

30-Dec-2006, 21:42	#8
Simon Reed Registered Forum User 500SD Posts: 524 Join Date: Aug 2001 Mood: Cool as **** ! They're all bips,@ the mo,steel subframe the lot !,just remove them straight into the bin,as wifes/girlfriends arn't allowed on,or near them,if only to assist applying zymol,its the law !!! Reply

31-Dec-2006, 14:25	#9
El Toro Registered Forum User Bikes: Yamaha R1 till Friday 3rd August the 848 Evo Corse Posts: 48 Join Date: Dec 2006 Location: Holmfirth, West Yorkshire Mood: Excited They are delivered as single seaters with a cowl fitted but with the seat pad and pegs seperately. My seat pad and pegs will be going on eBay Reply

31-Dec-2006, 21:40	#10
twpd Deceased 02/10/2010 - R.I.P. Ducati Corse Posts: 3,170 Join Date: Feb 2002 Location: Darlington, Co. Durham Mood: NGRRC Minitwins champion 2007 Steel subframe? That's gay. I'm deffo not buying one then - I wanna proper monoposto! Reply