Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > YIPEEEEEEEEEE !

[electricsheep]

Butch,

What rearsets are you using, mine won't clear the new 57mm pipe so I will have to put the standard pegs back on for now.

Rob

[dickieducati]

Originally posted by electricsheep
Butch,

What rearsets are you using, mine won't clear the new 57mm pipe so I will have to put the standard pegs back on for now.

Rob

oooooh, chirpy cheap rearsets going?

[andyb]

mate i think youll find you can just space them out 10mm??

[butch890]

Answers as follows,
Lily,i wouldnt have polished it if i'd known you 'd been fondeling it!
ES rear sets are Moto Corse units with a 18mm spacer fitted behind clutch side one.
I had already dropped down one tooth on the front sprocket which certainly improves drive but i think i will put the standard one back on now as i'm getting fed up with the front wheel being two foot off the ground all the time.
The kit comprises two heads ,new cams ,intakes,airfilter,ECU and a full 57mm termi system (sold to Ferrari Pete as i already had the Leo vinci) bike showed 118 bhp before the kit was fitted.
And yes i dont mind anybody trying it (just ask Montyabout the 890)
Butch

[andyb]

Butch youve got two heads..?

[butch890]

Sorry Andy ,thats gone over both of them.
Explain.

[UKRR]

Check this out for 749R base run info

http://www.moto-one.com.au/performance/749rbase.html

[andyb]

Originally posted by butch890
Sorry Andy ,thats gone over both of them.
Explain.

Just you said the kit comprises two heads........

Can you post your dyno chart?

[Ducnow]

Originally posted by butch890
Answers as follows,
Lily,i wouldnt have polished it if i'd known you 'd been fondeling it!
ES rear sets are Moto Corse units with a 18mm spacer fitted behind clutch side one.
I had already dropped down one tooth on the front sprocket which certainly improves drive but i think i will put the standard one back on now as i'm getting fed up with the front wheel being two foot off the ground all the time.
The kit comprises two heads ,new cams ,intakes,airfilter,ECU and a full 57mm termi system (sold to Ferrari Pete as i already had the Leo vinci) bike showed 118 bhp before the kit was fitted.
And yes i dont mind anybody trying it (just ask Montyabout the 890)
Butch

Thanks for the info Butch.
Now.... how much does that kit costs?
And yeah, post the dyno chart if you can.

[Ducnow]

Originally posted by UKRR
Check this out for 749R base run info

http://www.moto-one.com.au/performance/749rbase.html

I had seen that already.
Nice info there