MotoGP God
Posts: 18,274
Join Date: Apr 2002
Location: Oxford
Mood: Its ONLY a Bike Club
Are they worn out
Taken from the workshop manual
Normal Clutch
_______________
thickness of the drive plates (friction plates) should not be less than 3.5 mm.
Overall thickness of the set of clutch plates should not be less than 41.3 mm
APTC Clutch
______________
thickness of the drive plates (friction plates) should not be less than 3.2 mm.
Overall thickness of the set of clutch plates should not be less than 50,2 mm.
Checkout the Desmo Due Paddock on Facebook