Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Alternater nut

[Mello-Yellow]

What is the torque setting for the alternater nut on a '00 996.

Mine has worked it's way loose

[chrisw]

Haynes says 186nm

[crust]

Before you do it up, check the flat washer behind it is in the correct place and not dropped down.

I had the same thing and the washer got mashed by the gears and part of it found its way onto the sump plug.

Do a search on here for more info on this problem.

Crust

[keefer]

yep you need to strip it down to make sure it all goes back correctly

[Mello-Yellow]

Flat washer is split.

Have been told a different figure for the torque 270nm.


Sounds quite high this one.

[keefer]

270 is for the later testastreta engines

[Mello-Yellow]

Many thanks to Nelly @ Cornerspeed, He has put me right with the settings for the nut.

Cheers.

[chrisw]

What is it? May help others in the future.

[Mello-Yellow]

210 nm.

[stuart miles]

thanks for the settings i'v just had the same problem with my 996 but was told to look and see if the gears had been damaged.Wicked all fine.